Installation
The installation of a removable pool safety fence requires patience, skill and experience. When installed properly, the pool safety fence will look fantastic and provide an excellent layer of safety.
The installation process of a pool safety fence begins with the layout. After a careful review of the pool area, the pool deck is marked for drilling. 20cm holes are drilled approximately every 85cm. The resulting hole is very precise. Plastic deck sleeves are placed into these holes which hold and support the pool safety fence poles. When the pool safety fence is not in use, deck plugs are placed into the deck sleeves to fill the holes.
After the holes are drilled the swimming pool safety fence can be installed into the holes. The removable child safety fence comes in sections a maximum of 4.27m long. These sections are connected together to make a continuous pool safety fence which either completely surrounds the pool area or runs from one side of the yard to other. It is critical that the swimming pool safety fence creates a barrier between the pool and all doors and windows. A swimming pool safety fence that completely surrounds the pool will almost always be the safest layout option
Pool access and Self closing gates
Among the many wonderful features of pool fences are the access pool gates . Pool gates can be strategically placed throughout the fence so that access can be gained from various locations.
There are two ways you can gain access through the pool fence:
Self-closing, self-latching pool gate s are the most convenient and, as the name implies, are designed to close automatically (because the latch is a mechanical device, and could fail to close properly every time, it is important to inspect the pool gate to make sure the latch is secure). A key is provided to lock the gate when the pool is not in use (be sure to remove the key and store it in a safe place out of the reach of children). Self-closing pool gates are about 1m wide and require enough area and clearance for the gate to swing completely open outward from the pool water.
Manual pool gate openings are another option offered. These openings can be positioned nearly anywhere in the fence and are utilized by releasing the hooks between the poles and then rolling the fence open to gain access. The pool owner can determine the size of the pool gates or the length of the openings by removing one or more poles at a time. Additional holes are drilled in the deck to accommodate the pole that has been removed from the original hole. This is so you need not lay the opened portion of the fence on the ground.
Adults can conveniently enter or leave the pool area though any of the above types of pool gates , making a spontaneous swim a reality
Features
Panel sizes
Each panel is 1.25metres high. The fencing comes in sections that are a maximum of 4.27m long, each section is made up of 5 panels which are 838cm wide. A section of this maximum length weighs less than
5 kilos making it easy to move and store.
 |
Support Poles
Our swimming pool fences utilize aircraft grade aluminum pool fence poles. Structurally engineered pool fence pole reinforcements maximize the strength of our swimming pool fences.
|
|
 |
Self-Closing Gates
Our swimming pool fences utilize aircraft grade aluminum pool fence poles. Structurally engineered pool fence pole reinforcements maximize the strength of our swimming pool fences.
|
|
| |
| |
 |
Fence Storage
Pool fences can be taken down and the pool fence sections can be easily rolled up for compact storage of the pool fence. |
| |
|
 |
Custom Features
All-Safe swimming pool fences can be customized to adapt to most pool configurations. Installations of swimming pool fences with multi levels can be accommodated with raised pool fence panels and step poles.
|
| |
|
